Heatmiser Touch-RF, Manual

Page: 20 / 36

19
Wireless Series
Section Header
Hot Water Override
The keys under the temperature display allow you to adjust the
set temperature.
When you press either of these keys, you will see the temperature and
the word SET appear on screen.
Select the desired temperature and press to confirm and exit.
Temperature Control
Note: This new temperature is maintained only until the next programmed comfort level.
At this time, the thermostat will revert back to the programmed levels.
To override the hot water setting follow these steps.
• Press HOLD .................................................................................................................
• Press TIMER ..................................................................................................................
• If the hot water is already On – press OFF .......................................................
• If the hot water is already Off – press ON ........................................................
You will then see the hot water status change and the hot water output indication
will flash to show it has been overridden from the programmed setting.
The hot water will remain in the override state until the next programmed time.
To cancel, repeat the steps above.