Heatmiser TM1-TS WiFi RF, Operating Instructions Manual

Page: 16 / 24

14
You will then see the output status change and the output
indication will flash to show it has been overridden from the
programmed setting. The output will remain in the override
state until the next programmed time. To cancel, repeat the
steps above.
Timeclock Off
To turn the timeclock off completely, press and hold the Off
button. The display and output will be turned off. To turn the
timeclock back on, press the On button.
Count Down Timer Mode
• Use to select the Countdown time.
• Press Done.
The output will be active until the Countdown time expires
and the hold duration will display the time left.
To cancel the Countdown early, repeat the steps above
reducing the time to 00.00.