Heatmiser TM1-TS WiFi RF, Operating Instructions Manual

Page: 4 / 24

2
Setting up your WiFi Timeclock
Step 1: Download and install the network utility from our
web site: www.heatmiser.co.uk/wifi
Step 2: Connect the timeclock to your pc with the USB
cable provided, this will power the timeclock from the USB
port & will allow you to test the Wi-Fi connection.
On the Utility press Read to view the current timeclock
configuration.
Step 3: You should enter the SSID, Security Type and
Security Code of your wireless network. These settings can
be found in your wireless router, consult your router manual
for more information. For more details see security types
below.
Step 4: You need to enter a fixed IP address for your Wi-Fi
timeclock outside of the router DHCP range.
It is likely that your network will be configured to operate on
a DHCP basis – this means your router automatically issues
an IP address to a device that successfully connects to the
network.