Heatmiser PRTHW-TS, Operating Instructions Manual

Page: 25 / 40

Changing the Hot Water Times
• Press PROG and select Timer
• You will see TIME 1 and ON flash
• Use to set the on time for the 1st switching time
• Press Off and then use to set the off switching
time.
• You should now repeat for the Time 2-4
• Press Day to select the next day. In 5/2 day mode the
thermostat will highlight “Sat Sun” prompting you to
program the switching times for the weekend. In 7 day
mode, the thermostat will highlight Tuesday.
• When complete, press Done to Store and Exit.
Hot Water Override
The thermostat has an override function for the hot water
output allowing you to override the hotwater into the
opposite state.
• Press Hold
• Press Timer
• If the hotwater is already On – press Off
• If the hotwater is already Off – press On
23