Heatmiser PRTHW-TS, Operating Instructions Manual

Page: 11 / 40

Connecting to the Thermostat from your
Smartphone or Tablet application
To connect to your thermostat, launch the app on your
smartphone or tablet, there are now three sections to fill in.
Lan IP – This is the static IP address you have assigned to
the WiFi thermostat.
WAN IP – This is either your static IP address or Dynamic
DNS address when connecting to your network remotely.
PIN – This is the four digit pin number assigned to the WiFi
thermostat on configuration.
Once this information has been entered the app will store
this for the next time you connect.
Pairing the Thermostat
with the RC1-W receiver
If using the UH1-W wiring centre as the receiver turn to page 8
On the RC1-W:
Press & hold the pairing button on the RC1-W receiver until
the comms led lights up.
9