SnowMeltz® Installation
Registration Form
Instructions: This form must be completed and returned for each installation.
A copy should be retained by the homeowner. An installation is defined as
each individual space in which SnowMeltz® is installed such as a driveway,
patio, walkway, etc. Each SnowMeltz® shipment includes the following
information essential to the proper installation of the products: Installation/Homeowners Manual, Wiring Diagrams, and
Megohmmeter and Ohm Readings necessary to test the products. If any of this information is missing from the shipment,
please call the dealer or our service department at 1-888-239-1232.
TO ENSURE WARRANTY PROTECTION FOR THE INSTALLATION(S), THE HOMEOWNER OR INSTALLER MUST
COMPLETE ALL THE INFORMATION BELOW FOR EACH INSTALLATION AND RETURN THIS FORM TO HEATIZON
SYSTEMS AT THE ADDRESS LISTED BELOW WITHIN 10 DAYS OF THE COMPLETED INSTALLATION.
I. Installer Information:
Installer’s Name: _________________________________________________________ Installation Date: ___-___-___
Business Address ______________________________________________________________________________________
Phone Number: _____-_____-______ Email Address: _____________________________________________________
Name of Company (from which SnowMeltz® was purchased) _________________________________________
II. Owner Information:
Owner’s Name: ________________________________________________________________________________________
Home Address: ________________________________________________________________________________________
Phone Number: _____-_____-______ Email Address: _____________________________________________________
Name of Space and Location where installed: ____________________________________________
III. Products Used in Installation:
(List Each SnowMeltz® Mat on a Separate Line)
(Note: “Hot” or “Neutral” in this table indicates the white conductors in the Cold Lead)
Confirmation: The above information was measured and recorded correctly as indicated on the measuring
instrument, and the enclosed drawing shows the final layout of the products and the electrical connections.
Installer’s Signature: ________________________________________________________________________________________________________
Mat or
Cable
Number
Model #
Total Watts
Volts
M E T E R R E A D I N G S
Tests after mat has been received
After Mat is customized/cut and installed
After Mat has been embedded in concrete/
asphalt/sand or before final wiring
Megher
Test
Conductor
to
Conductor
Conductor
to Ground
Conductor
to Ground
Megher
Test
Conductor
to
Conductor
Conductor
to Ground
Conductor
to Ground
Megher
Test
Conductor
to
Conductor
Conductor
to Ground
Conductor
to Ground
SAMPLE
1x 50
1850
240
532
19.2
Open
Open
532
19.2
Open
Open
532
19.2
Open
Open
#1
#2
#3
#4
#5
From Heatizon Systems
4137 South 500 West
Murray, Utah 84123
888-239-1232 | heatizon.com
