HEATIZON.COM
24
Symptom
Probable Causes
Corrective Action
Area doesn’t heat
No voltage.
Check circuit breaker.
Circuit breaker tripped.
Ensure that the SnowMeltz®
system is wired correctly
for your application. The
SnowMeltz® system requires
a dedicated circuit(s). See the
Product Selection “Table 1” of
this manual
Contactor/relay panel
deactivated
Refer to panel Installation
and Operation Manual.
Activator not configured
or wired correctly.
Refer to specific instructions
included with the activator
purchased for use with this
system.
Area activated continously Activator not properly
confugred.
Refer to specific instructions
included with the activator
purchased for use with this
system.
Installation instructions
Download SnowMeltz®
Installation instructions from
www.heatizon.com
Cut or damaged the cable
Call Heatizon immediately:
888.239.1232 or
(8 am - 5 pm, (MST) M-F, Closed holidays)
14. Troubleshooting
