02/04
4031-117 Rev I
27
NOVUS DIRECT VENT INSTALLATION INSTRUCTIONS
5. Prepare the Appliance
a. Log Set
The log set should look similar to that in
Figure 52.
c. Place the Rock Wool
Place a small amount of 1/2 in. diameter pieces
(dime-size) of rock wool on the burner pan so that
the rock wool touches but does not cover the
holes in the burner pan. This will provide the
glowing embers look. See Figure 55. It is not
necessary to use the entire bag. Save the
remaining rock wool for future use.
b. Place the Lava Rock and Vermiculite
See Figure 53 for lava rock and Figure 54 for
vermiculite placement. It is not necessary to use
the entire bag. Save the remaining for future use.
Figure 53 - Placing the Lava Rock
Figure 54 - Placing the Vermiculite
Figure 52 - Log Sets
Figure 55 - Placing the Rock Wool
WARNING! RISK OF CARBON MONOXIDE!
Do not hit or strike glass. Do not operate this appli-
ance with the glass removed, broken or not sealed.
d. Place the Fire Glow
(not supplied)
Fire Glow (FIRE98) is a flame colorant material
that adds to the realism of the gas appliance
flame. After placing the rock wool in the appliance,
sprinkle some of the fire glow on top of the rock
wool. As with the lava rock, vermiculite and rock
wool, it is not necessary to use the entire bag.
Save the remaining Fire Glow for future use.
ND3630 & ND3933
ND4236 & ND4842