28
Heatilator • Novus Mesh DV • 4031-552 Rev I • 11/07
B. Rear Vent
• Fold the tabs toward the center of the
fi
re plug (90°) and
remove the insulation gasket.
Figure 7.7 Remove Insulation Gasket
Figure 7.8 Metal Retaining Band
Figure 7.9 Fold Retaining Band
Figure 7.10 Insulation Basket
Figure 7.11 First Vent Section
• Cut the metal retaining band and fold the sides out.
• Fold the center parts of the retaining band out and use to
remove the vent cap.
• Discard the vent cap, remove and discard the insulation
basket.
• Attach
the
fi
rst vent section (it will snap into place). Slide
the insulation gasket onto the vent section against the
appliance and over the tabs.
Note:
Once the vent cap has been removed it CANNOT
be reattached.
Summary of Contents for ND4842MI
Page 65: ...Heatilator Novus Mesh DV 4031 552 Rev I 11 07 65 This page intentionally left blank...
Page 84: ...84 Heatilator Novus Mesh DV 4031 552 Rev I 11 07 This page intentionally left blank...
Page 85: ...Heatilator Novus Mesh DV 4031 552 Rev I 11 07 85 This page intentionally left blank...
Page 86: ...86 Heatilator Novus Mesh DV 4031 552 Rev I 11 07...