38
Heatilator • ICON DV • 4042-300 Rev R • 06/07
Decorative Screen Front
Front Hearth Refractory
Right Side Refractory Panel
Glass Frame Assembly
Left Side
Refractory Panel
Glass Latch
Figure 12.10 Glass Panel Assembly Removal/Replacement
I. Glass Panel Assembly
Removing/Replacing Glass Assembly
(See Figure 12.10)
• Remove decorative screen front. Disengage spring pins
located at upper right and left corners between screen
and frame by pulling down.
Tilt top of frame away from appliance and lift up and out
of bottom slots.
• Remove three outer refractory pieces as per instructions
in Section J.
• Release glass latches (six in ICON60I, ten in ICON100I).
Lift glass frame assembly carefully off bottom glass
support and set aside.
• Reverse steps above to replace the glass assembly.