Heatilator • Eclipse • 4049-300 Rev H • 11/07
33
12
12
Appliance Setup
A. Remove Packed Materials
Remove the two cartons containing from surround and front
face assembly.
• Remove top strap by removing the two screws holding the
strap to the face of the unit. Discard strap, set top carton
aside.
• Remove bottom strap in the same manner and discard.
Set bottom carton aside. See Figure 12.1.
B. Remove Glass Assembly
C. Logs
Logs are factory installed.
Handle glass doors with care.
• Inspect the gasket to ensure it is
undamaged.
• Inspect the glass for cracks, chips or
scratches.
• Do NOT strike, slam or scratch glass.
• Do NOT operate appliance with glass
door removed, cracked, broken or
scratched.
• Replace glass door assembly as a
complete assembly.
WARNING
• Pull the four glass assembly latches out of the groove on
the glass frame. See Figure 12.3
Remove Screws
Figure 12.1 Remove Shipping Straps
• Remove the two screws holding the bottom support bar
to the front face. Slide the bar to the left, pull the right
side out and slide left side out of slot and discard. See
Figure 12.2.
Latches
(both bottom
and top)
Glass
Assembly
Figure 12.3 Glass Assembly
Figure 12.2 Remove Bottom Support Bar
• Remove the glass panel from the appliance.
• Lay aside on a nonabrasive surface.
Figure 12.4 Log Set
