Heatilator ECO-WINS18 Owner'S Manual Download

Page: 48 / 48

7065-132I • May 18, 2017

www.heatilatorecochoice.com

CONTACT INFORMATION

Hearth & Home Technologies

352 Mountain House Road

Halifax, PA 17032

Division of HNI INDUSTRIES

Please contact your Heatilator dealer with any questions or concerns.

For the number of your nearest Heatilator dealer

log onto www.heatilator.com

DO NOT DISCARD THIS MANUAL

CAUTION

• Important operating and

maintenance instruc-

tions included.

•

Leave this manual with

party responsible for use

and operation.

•

Read, understand and

follow these instruc-

tions for safe installa-

tion and operation.

DO NOT

DISCARD

We recommend that you record the following pertinent

information for your heating appliance.

Date purchased/installed:_________________________________________________________________________

Serial Number:____________________________________ Location on appliance:___________________________

Dealership purchased from:________________________________________ Dealer phone:_1(_____)_____-______

Notes:________________________________________________________________________________________

______________________________________________________________________________________________

This product may be covered by one or more of the following patents: (United States) 5341794, 5263471, 6688302, 7216645, 7047962

or other U.S. and foreign patents pending.

Summary of Contents for ECO-WINS18

















































Search results

Summary of Contents for ECO-WINS18

Reviews:

Related manuals for ECO-WINS18

Brands by name

Popular brands

Heatilator ECO-WINS18, Owner'S Manual

Search results

Summary of Contents for ECO-WINS18

Reviews:

Related manuals for ECO-WINS18

Brands by name

Popular brands