5
4
Disposal Responsibilities:
The equipment you purchased may contain hazardous substances that
could impact the environment. Per regulations on electronic devices in
the European Community, you must use the appropriate disposal
systems to avoid exposure of these substances to the environment.
The disposal systems will reuse or recycle hazardous materials from
your equipment responsibly.
The crossed-out wheeled bin symbol invites you
to use those systems.
If you need more information on the collection, reuse and recycling
systems, please contact your local or regional waste administration.
You can also contact us for more information on the environmental
performance of our products.
Changes or modifications to the product not expressly approved by the manu-
facturer could void the user’s authority to operate the equipment.
This product has been tested and found to comply with the limits of
a Class A digital device pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
when the product is operating in a commercial
environment. The product generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the user’s manual
may cause harmful interference to radio communications. Operation of the
product in a residential area is likely to caused interference in which case
the user will be required to correct the interference.
Supplied Equipment:
•
1 ea. Centrifuge
•
1 ea. Universal AC power adapter with 4 mains cables
•
1 ea. Standard Tube rotor (1.5mL & 2.0mL tubes) (12,500 rpm)
•
1 ea. Strip tube rotor (8 place 0.2ml Strip Tubes or 32 individual 0.2ml
tubes) (12,500 rpm)
•
12 ea. 0.2mL tube adapters (for use in the standard rotor only)
•
12 ea. 0.5mL tube adapters (for use in the standard rotor only)
Operating Conditions:
Maximum speed: 500rpm - 12,500 rpm
Maximum RCF: 9,800 RCF
Electrical: 100 – 240VAC, 50/60Hz
Ambient temperature: 2°C to 40°C
Relative humidity: ≤80% noncondensing
Power Requirements:
12VDC 8.33A
Storage Conditions:
Storage temperature: 20°C - 55°C
Relative humidity: ≤90% noncondensing
Technical Data
EC Declaration of Conformity
Manufacturer: Heathrow Scientific®
Address: 620 Lakeview Parkway • Vernon Hills, IL 60061 USA
European Contact: Emergo Europe
Molenstraat 15, 2513 BH, The Hague, The Netherlands
This unit has been constructed and conforms to the following:
Safety Standards:
EN61010-1:2010
EN61010-2-020:2006
IEC61010-1
IEC61010-2-020
UL Std. 61010A-1, 61010A-02-20
CAN/CSA C22.2 No. 61010-1-04 (R2009)
CAN/CSA C22.2 No. 61010-2-020-09
2006/95/EC (Low Voltage Directive)
EMC Standards:
EN61326-1:2006
2002/96/EC (WEEE)
2002/95/EC (RoHS)
Signed:
Jamie Devin, Managing Director
Note:
—
Note:
—
Positive Polarity
This mark is the confirmation that the unit conforms to
the EU guidelines and has been tested according to the
following EU Declaration of Conformity.
Conforms to UL Std. 61010-1.
Certified to CAN/CSA C22.2 No. 1010.2.020-94.
www.
.com
1.800.561.8187
