8
To Set the Speed Function
1. Rotate the speed control knob clockwise to increase the speed and counterclockwise
to decrease speed. The display will indicate the rpm set.
2. Press the speed control knob to start shaking or set timing function
(see instructions below).
3. The speed control optical encoder provides instant readout of the actual platform
rotation speed.
To Set the Timer Function
1. Rotate the timer control knob clockwise to adjust the operating time. The display will
indicate the minutes set.
2. Press the speed control knob to start shaking or change speed setting
(see instructions above).
3. The speed control optical encoder provides instant readout of the actual platform
rotation speed.
4. Unit will beep once programmed time has expired. Platform will stop shaking.
5. Remove vessels once platform has completely stopped.
To Set the Continuous Timing Function
1. Press the time control knob to set for continuous use.
2. Press the speed control knob to start shaking or change speed setting
(see instructions above).
3. The speed control optical encoder provides instant readout of the actual platform
rotation speed.
To Stop Shaking Function
1. Press the speed control knob to stop shaking.
2. Remove vessels once platform has completely stopped.
Note: — After an interruption in the power supply during shaking operation, the shaker
will not start running again by itself.
