2
Safety Precautions
This orbital shaker is a benchtop shaker designed for laboratories in the bioscience,
physical science, and chemistry fields. It is NOT intended for use in C0
2
environments.
Intended to mix solutions in various labware vessels. It may be involved with biohazardous
and/or hazardous materials. This instruction manual can not address all safety hazards. It is
the responsibility of the user to consult and observe all health and safety precautions and
to assess the instrument’s suitability to the task.
Caution!
Not intended for C0
2
environments. Before starting the orbital shaker for the first time,
please read this instruction manual carefully. This manual contains important information,
safeguards, and operating instructions. Improper use of the instrument voids the warranty.
1. Before each use: inspect the unit for damage (broken or cracked housing, loose fasteners,
damage from solvents, etc.) before connecting the power cord. Do not use the unit if any
damage is found.
2. Never use this instrument in any manner inconsistent with these instructions.
3. Observe general laboratory safety precautions and regulations.
4. Do not modify construction and/or assembly of shaker.
5. Do not lift shaker by platform.
6. The platform must always be securely fastened.
7. All shaking vessels or containers must be secured to platform.
8. Do not use a damaged power adapter, power cord, platform, or bungee cords.
9. Use a properly grounded electrical outlet of correct voltage and current handling capacity.
10. Place the unit on a clean, sturdy, level surface at least 12" (30cm) away from the edge of the
counter and other moving equipment. Make sure the AC power adapter and cords are clear
of hot surfaces and other hazards. Ensure no person or hazardous substances are within a
12" (30cm) zone around the unit.
11. Stand clear of equipment when it is operating. Ensure that parts of the body, hair, or
clothing can not be trapped by the motion of the unit.
12. Do not put hands in the platform area unless the platform is completely stopped.
13. Do not move unit while the shaker is shaking.
14. Do not immerse unit in water. Injury due to shock or fire may result.
15. The platform must be loaded symmetrically. Operating this unit with an unbalanced
platform will cause severe vibration and damage, which is not covered by warranty.
16. Do not fill vessels or containers while attached to platform. Spilled liquid may harm unit.
17. Seal vessels or close containers before starting to shake. Open vessels or containers can
spill contents during shaking and damage the unit.
18. Follow all precautions from the Material Safety Data Sheet (MSDS) for any reagent you use
with this instrument.
19. Do not over extend bungee cord fasteners.
20. Use appropriate hand, eye, and face protection.
Contents
Safety Precautions .........................................................................................................................2
Technical Data .............................................................................................................................3
Disposal Responsibilities ...............................................................................................................4
