4
EC Declaration of Conformity
Manufacturer: Heathrow Scientific LLC
Address: 620 Lakeview Parkway • Vernon Hills, IL 60061 USA
www.heathrowscientific.com
European Contact/Authorized Representative: Emergo, Europe Prinsessegracht 20, 2514 AP,
The Hague, The Netherlands
www.emergogroup.com
Model: Digital Orbital Shaker
This unit has been constructed and conforms to the following:
Safety Standards:
IEC/EN 61010-1:2010 ed. 3 + c1, c2
UL Std. 61010-1:2012 ed. 3 (R2016)
CAN/CSA C22.2 No. 61010-1-12: 2012 ed. 3 + ui:u2(R2017)
2014/35/EU (Low Voltage Directive)
EMC Standards:
IEC 61326-1:2012 (EN 61326-1:2013)
FCC Part 15, Subpart: B: 2015
ICES-003, Issue 6
2012/96/EU (WEEE)
2015/863/EU (RoHS)
Signed:
Gary Kamees
Vice President Product Development and Manufacturing June, 2019
This mark is the confirmation that the unit conforms to the EU
guidelines and has been tested according to the Electromagnetic
Compatibility Directive 2014/30/EU and to the Low Voltage directive
2014/35/EU per the above EU Declaration of Conformity by an
independent internationally recognized testing laboratory.
3
Please note that changes or modifications of this product is not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
Note: this equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
5003396
