-4-
207351-01
4. Test range. Temporarily position push button where you
want it mounted. Press push button to verify chime and
push button work properly. If chime does not sound, see
Troubleshooting
.
5. Mount push button. Use either screws or double sided
tape to mount push button.
•
Screw Mounting: To mount with screws, remove
back of case by pushing in tab on bottom with a small
screwdriver (see Figure 1).
Note:
Remove material in
screw holes (if needed) before mounting with screws.
Attach back of case to door jamb or wall (see Figure
8). Snap front of push button on.
•
Tape Mounting: When attaching push button using
double sided tape, make sure the surface of the door
jamb or wall is clean.
ON
1 2
Figure 5
Figure 6
Figure 7
Chime
Setting
Push
Button
Setting
0
30 Sec.
Chime Setting
Push Button Setting
ON
1 2
ON
1 2 3 4 5 6 7 8
TYPE “C”
TYPE “C”
1 2 3 4 5 6 7 8
Figure 8
