Features
• Light comes on when motion is detected.
• Automatically turns light off.
• Photocell keeps the light off during daylight
hours.
requirements
• The light control requires 120 volts AC.
• If you want to use Manual Mode, the control must
be wired through a switch.
•
some electrical codes require installation by
a qualified electrician.
motion sensing
Porch Light
This package includes:
• Porch Light
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Nuts
• Lens Shield
SL-4305
© 2007 HeathCo LLC
598-1184-04
OPeratiOn
Note:
When first turned on wait about 1
1
/
2
minutes
for the circuitry to calibrate.
* resets to Auto Mode at dawn.
ON-TIME
Set the ON-TIME switch
on the sensor to TEST.
test 1 5 10 MIN
test
Set ON-TIME switch to
1, 5, or 10 minutes.
autO
ON-TIME Switch at 1, 5, or
10 minutes
... back on.
1 Second OFF
then
...
Manual mode only works at night
because daylight returns the sen-
sor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with
the ON-TIME switch in the 1, 5,
or 10 position.
mOde switching summary
Flip light switch off
for one second then
back on*
* If you get confused while switching modes, turn the
power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.
MANUAL MODE
AUTO
TEST
manuaL mOde
ON-TIME
TEST
1 5 10 min
Before installation, record the model number
listed inside the fixture. attach receipt in case
of possible warranty issues.
model number:
Mode:
On-Time
Works: Day Night
test
5 Seconds
x
x
auto
1, 5, or 10 Min
x
manual
To Dawn*
x
