Heath Zenith Heath/Zenith Lighting Control Panel, Quick Start Manual

Page: 5 / 24

5
598-1136-03
AM
PM
A
A B
ON
OFF
ON
OFF
DIM
GROUP
MODE
ALL
ON
ALL
OFF
PANIC
DIM
ON
OFF
ON
OFF
DIM DIM
ON
OFF
ON
OFF
DIM DIM
ON
OFF
ON
OFF
DIM DIM
– Select Time Set Program +
1 2
EXAMPLE 2 – Programming ON/OFF Times
Following is an example of how to program a light source to turn ON and OFF
at preset times. In this example the kitchen lights (Group A from previous
example) will be programmed to turn ON in the morning at 6:45 am and turn OFF
at 9:00 am. The same light will also be programmed to turn ON in the evening
at 4:00 pm and turn OFF at 10:00 pm.
➊
Press Group A button -
Note: Indicator light is ON.
A
➋
Press Program button -
Note: Program indicator light
and Mode 1 light are ON.
1 2
➌
The hour numbers are high-
lighted when Program mode is
entered. Press (+) and (-) but-
tons - Change hours to 6 am.
➍
Press Select button - Note:
Minute numbers will highlight.
➎
Press (+) and (-) buttons -
Change minutes to 45.
➏
Press ON button of kitchen
light control -
Note: Indicator
light FLASHES.
To set OFF time, complete the follow-
ing steps:
A
Press Select button - Note: Hour
numbers will highlight.
B
Press (+) and (-) buttons - Change
hours to 9 am.
C
Press Select button - Note: Minute
numbers will highlight.
D
Press (+) and (-) buttons - Change
minutes to 00.
E
Press OFF button of kitchen light
control -
Note: Indicator light
FLASHES.
t Program
To program 2nd ON/OFF time:
➋
Press Program button - Note: Mode
#2 indicator light should be ON for
this example.
Beginning with step 3 above, program
the ON time to 4:00 pm and the OFF
time to 10:00 pm.
To exit Program, press the Program
button until the Program indicator light
is OFF.
Note: To cancel a program, set both the
ON time and the OFF time to the same
time (
Example: Set both the ON time
and the OFF time to 4:00 pm to cancel
the 2nd program above).
Note: Mode should be set to modes 1
and 2 to run both time programs in this
example.
A
Each control can be programmed a maxi-
mum of 2 programs. See charts below for
possible choices.
ON/OFF
Program 1 Group A
1 Group B
ON/OFF
Program 2 Group A
0 Group B
ON/OFF
Program 0 Group A
2 Group B
OR
OR