3
204069-01
WIRING
One Motion Light
Two Motion Lights
Recommended Grounding Method
Use a green ground “pigtail” (not provided) and twist
one end together with the bare fixture wire and the
box ground wire. Secure with a wire connector. Secure
the other end of the “pigtail” with the GND screw on
the X-bar.
CAUTION: DO NOT connect the RED wire unless
you want to control other lights from the motion
sensor (see Optional Wiring).
Black to black
White to white
Note:
All wiring must be run in accordance with the
National Electrical Code through conduit or another ac-
ceptable means. Contact a qualified electrician if there is
any question as to the suitability of the system.
WARNING: Turn power off at circuit breaker
or fuse.
If you have metal junction box, you may not need the green
“pigtail”. If you are unsure about the grounding method,
consult your local building code.
Connect the fixture wires to the wires in the junction
box. Twist the wires together and secure with wire con-
nectors.
Black
White
Green or
Bare
Black
White
Green or
Bare