background image

Operator’s Manual

7

RMLD-FR

Doc No. 16086 Rev A, RMLD-FR Operator Manual 

© 2021 Heath Consultants Incorporated. All rights reserved.

Battery Pack

Dual Bay Battery Charger

- Provides the power to the  

instrument

- Removable
- Rechargeable
- Lithium-ion

- Up to 8 hours of operating time 

when fully charged. 

NOTICE: Must recharge between 

uses to assure no interruption in use

NOTICE

- Charge two batteries  

simultaneously

- Includes a universal AC adapter  

and power cord

- An integrated metal bracket 

included on the bottom of the 

charger allows for wall or fixed 

mounting options. 

To wall mount charger use four 8-32 screws to thread into self-clinching nuts 
on charger chassis. Thread dept is 0.060in, max screw intrusion is .150in. 

NOTICE: Access to both sides of the mounting wall are needed. 

NOTICE: For wall mounted or mobile applications, HEATH recommends 

securing the battery to the charger using the captive screws attached to 
the battery pack.

NOTICE

DANGER: Do not use the device in 

a hazardous environment.

DANGER: To reduce the risk of 
ignition of a flammable or explo

-

sive atmosphere, batteries must be 

recharged only in a location known 
to be non-hazardous.

DANGER

NOTICE: Do not dispose of this 

product in the unsorted municipal 
waste stream. Dispose of this prod-
uct according to local regulations.

Two (2) 

charging

bays

Universal AC adapter

Power cord

Summary of Contents for RMLD-FR




























Reviews: