13
Heat & Glo • TIARII-BK-IPI, TIARII-BR-IPI, TIARII-CES-IPI Owner’s Manual • 2340-981 • 6/14
Glass Cleaning
Frequency:
Seasonally
By:
homeowner
Tools Needed
: Protective gloves, glass cleaner, drop
cloth and a stable work surface.
CAUTION!
Handle fixed glass assembly with care.
Glass is breakable.
• Avoid striking, scratching or slamming glass.
• Avoid abrasive cleaners.
•
DO NOT clean glass while it is hot.
B. Maintenance Tasks - Homeowner
the following tasks may be performed annually by the
homeowner. If you are uncomfortable performing any of
the listed tasks, please call your dealer for a service ap
-
pointment.
More frequent cleaning may be required due to lint from
carpeting or other factors. control compartment, burner
and circulating air passageway of the fireplace must be
kept clean.
CAUTION! Risk of Burns! The fireplace should be
turned off and cooled before servicing.
Any safety screen or guard removed for servicing must be
replaced prior to operating the fireplace.
Installation and repair should be done by a qualified service
technician only. the fireplace should be inspected before
use and at least annually by a professional service person.
4
Maintenance and Service
Task
Frequency
To be completed by
glass Cleaning
Seasonally
homeowner
remote Control
Seasonally
Venting
Seasonally
gasket Seal
and glass
Inspection
Annually
Qualified Service
Technician
log Inspection
Annually
Firebox
Inspection
Annually
Control
Compartment &
firebox top
Annually
Burner Ignition
& Operation
Annually
A. Maintenance: Frequency and Tasks
•
Prepare a work area large enough to accommodate fixed
glass assembly and door frame by placing a drop cloth
on a flat, stable surface.
Note
: Fixed glass assembly and gasketing may have res
-
idue that can stain carpeting or floor surfaces.
• Remove front casting by grasping it at the top and lifting
up. If the stove is already installed in a top vented
configuration, the top casting will need to be lifted slightly
to accommodate removal of the front casting. See Figure
4.1. Set front casting aside on prepared work surface.
• Remove the three Phillips head screws at the top of the
glass frame. Remove glass from appliance. See Figure
4.2.
• clean glass with a non-abrasive commercially available
cleaner
.
- light deposits: Use a soft cloth with soap and water.
- heavy deposits: Use commercial fireplace glass
cleaner (consult with your dealer).
Figure 4.2 Remove Glass Frame
Figure 4.1 Remove Casting
TOP CASTING
FRONT CASTING
PHILLIPS SCREWS
When properly maintained, your fireplace will give you
many years of trouble-free service.
Contact your dealer
to answer questions regarding proper operation, trou-
bleshooting and service for your appliance. Visit www.
heatnglo.com to locate a dealer. We recommend annual
service by a qualified service technician.
