18
Hearth & Home Technologies • 6100PLUS • 4041-127 Rev D • 09/05
D.
W all
Switch
This appliance comes with a triple-gang wall switch which controls the following functions:
• Flam
e - On/Off
Turns the appliance burner operation on and off. This switch may be overridden by the use of a wall switch, remote control
or hearth thermostat connected to the REM terminals.
• Electr
ic Embers - On/Off
Turns electric ember lights on and off. Electric ember lights are optional only when the appliance burners are not in use.
Electric ember lights are always on during ame operation.
• Hi Fire/Low Fir
e
Turns gas valve solenoid off for 100% rate operation and on for 70% rate operation.
Note:
When wired as shown the appliance will operate when any of the following actions occur:
1. The wall switch is placed in the “ON ” posi tion, or
2. The remote control is placed in the “ON ” mode, or
3. The hearth room thermostat is placed in the “ON ” posi tion.
Note:
Accessory circulating fans CANNOT be used with the 6100PLUS.
Figure 8.4 Circuit Board to Switches
E. Optional
Accessories Requirements
Wiring for optional accessories should be done now to avoid reconstruction. These controls must be connected to the ap-
pliance using the REM terminals on the control board. A wiring diagram is shown in Figure 8.4.
Summary of Contents for 6100PLUS
Page 26: ...26 Hearth Home Technologies 6100PLUS 4041 127 Rev D 09 05 B LightingtheAppliance ...
Page 30: ...30 Hearth Home Technologies 6100PLUS 4041 127 Rev D 09 05 Thispageintentionallyleftblank ...
Page 32: ...38 Hearth Home Technologies 6100PLUS 4041 127 Rev D 09 05 Thispageintentionallyleftblank ...
