22
The diagram below shows how to properly position,
level, and secure the fireplace.
1. Place the fireplace
into position.
2. Level the fireplace
from side to side
and from front to
back.
3. Shim the fireplace
with non-combus-
tible material, such
as sheet metal, as
necessary.
4. Secure the fire-
place to the
framing by nailing
or screwing
Figure 23. Proper Positioning, Leveling, and
Securing of a Fireplace
WARNING: THIS UNIT IS NOT FOR
USE WITH SOLID FUEL.
The gas control systems used with these models are
Direct Spark Ignition (DSI).
Direct Spark Ignition (DSI) System
This system includes a 120V control valve, electronic
module, and spark ignitor/flame sensor.
WARNING: CONTINUOUS 110-120
VAC SERVICE WE MUST BE
WIRED TO THE FIREPLACE
JUNCTION BOX IN A DSI SYSTEM.
WARNING: DIRECT VENT
PROPANE MODELS WITH DSI
CONTROL SYSTEMS CANNOT BE
USED IN CANADA.
Step 4
Positioning,
Leveling, and
Securing the
Fireplace
Step 5
The Gas Control
Systems