16
35035 Rev D
07/03
STS-42 INSTALLATION INSTRUCTIONS
11. Installing the Chimney Air Kit
When installing the chimney air kit, follow the
instructions provided with this accessory.
Figure 17 - Cooling Air Location
Note:
The cooling air kit must terminate at least six
feet above ground level.
10. Installing the Required Cooling Air Kit
(furnished)
The cooling air kit is supplied as a standard feature
with this fireplace and is
required
for safe operation.
Installation must be done at the time of initial
construction. The cooling air inlet tubes must be a
minimum of 72 above the base of the fireplace. This
is to prevent potential blockage by snow or yard debris.
See Figure 17.
To install the air kit collar, slide one of the tabs of the
collar down into the seam. See Figure 18.
Secure the collar tabs to the fireplace by placing the
screws into the holes provided. See Figure 19.
Repeat for the other side.
Figure 18 - Insert the Tabs
Figure 19 - Securing the Tabs
