manualshive.com logo in svg

Heat & Glo SL-7BV, Owner'S Manual, Page: 20 / 23

Share
Download
Heat & Glo SL-7BV Owner'S Manual Download Page 20

Heat & Glo  • SL-7BV Owner’s Manual  •  2395-981 Rev. F  •  1/19 

20

6 

Reference Materials 

 

A. Accessories

Remote Controls, Wall Controls and Wall
Switches

After a qualified service technician has installed the  re

-

mote control, wall control or wall switch, follow the in-

structions supplied with the control installed to operate 

your fireplace:
For safety:
•  Install a switch lock or a wall/remote control with child 

protection lockout feature.

•  Keep remote controls out of reach of children.
See your dealer if you have questions.

Install approved accessories per instructions included 

with  accessories.  Contact  your  dealer  for  a  list  of  ap

-

proved accessories.

WARNING! 

Risk of Fire and Electric Shock! 

Use ONLY 

Hearth  &  Home  Technologies-approved  optional  acces

-

sories  with  this  appliance.  Using  non-listed  accessories 

could result in a safety hazard and will void the warranty. 

Optional Fan

After a qualified service technician has installed the fan, 

follow the instructions supplied with the fan kit to operate 

your fan.  See your dealer if you have questions.

Optional Heat-Zone

®

 Gas Kit

After  a  qualified  service  technician  has  installed  the  

Heat-Zone

® 

Gas Kit, follow the instruction supplied with the 

kit for operation.  See your dealer if you have questions.

Summary of Contents for SL-7BV
























Reviews:

No comments