manualshive.com logo in svg

Heat & Glo SL-7BV, Owner'S Manual, Page: 13 / 23

Share
Download
Heat & Glo SL-7BV Owner'S Manual Download Page 13

13

Heat & Glo  • SL-7BV Owner’s Manual  •   2395-981 Rev. F  •  1/19 

J. Detailed Component Operating Instruc-

tions - IntelliFire Ignition

Appliance ON/OFF

A wall control or remote control may be used to control 

the ON/OFF function of the appliance. Follow instructions 

included with the installed control.

IntelliFire™ Ignition System

Intellifire

™ 

is an intermittent pilot ignition, which is an

electronic system. The term Intermittent is used because

the pilot burner flame is only present when the main

burner is operating. When the main burner is off, the pilot

is also off.

NOTICE: 

Batteries should not be placed in the battery 

pack while using the transformer. Remove batteries before 

using the transformer, and unplug the transformer before 

installing the batteries. Battery polarity must be correct or 

module damage will occur.

Optional Fan Kit 

If desired, a fan kit may be added.  Contact your dealer 

to order the correct fan kit. Heat management for the fan 

is discussed in Section 3.G.  Detailed instructions are in

-

cluded with the fan kit.

Summary of Contents for SL-7BV
























Reviews:

No comments