Heat & Glo • GEM-36B • 2095-900 Rev. H • 3/06
37
Log Assembly: LOGS-GEM36
E. Positioning the Logs
If the gas logs have been factory installed they should not
need to be positioned. If the logs have been packaged
separately, refer to the following instructions.
370-935F
CAUTION:
Carefully remove the logs
from the packaging. Logs are fragile!
Before proceeding be sure to remove
and discard the foam shipping pads
shown here.
4
1
2
3
STEP 1.
Remove grate which is shipped on top of
appliance. Position the log grate as
shown. Use the grate locating tabs that
are located at the back corners of the
burner.
FOAM SHIPPING PADS
A
B
C
D
STEP 2.
Locate the left and right notches on the bottom of log #1. Mate the notches with grate tabs A and B as shown.
1
Front view
1
Top, reversed view
