Installation Requirements
Due to continuing product improvements, Heartland Appliances reserves the right to amend specifica-
tions without notice. Please contact Heartland for the most up to date information, as it applies to product
being purchased, or download latest Site Preparation Specifications from www.heartlandapp.com.
Help Desk
877-650-5775
Heartland Appliances Inc. 1050 Fountain St North, Cambridge, ON, N3H 4R7
36
#02023
12-07-2006
© 2005 HEARTLAND APPLIANCES INC.
Model 3820/3820B
(page 2 of 2)
Rough In
Measurements
Dimensions
APPLIANCE REQUIREMENTS
APPLIANCE REQUIREMENTS
Range Hood can only be vented from
above the hood as shown below (see Vent
Hood Specifications for full details)
Back of stove view
20” High
backguard
low profile
backguard
8-1/4”
(21 cm)
14-1/4”
(36.2 cm)
standard
backguard
Air intake slots on
underside of control
panel must not be
obstructed
36”
(92 cm)
26-5/8”
(68 cm)
Power
Cord
Gas Inlet
1/2” NPT
Standard backguard
6” (15.3 cm)
36”
(91.4 cm)
8-1/4” (21 cm)
2” (5.1 cm)
2” (5.1 cm)
4”
(10.2 cm)
20” high backguard
with 5” shelf
Standard 6” high
backguard
Low profile 2”
high backguard
2” (5.1 cm)
6”
(15.3 cm)
20” (51 cm)
26-5/8”
(68 cm)
4” (10.2 cm)
Electrical
Gas outlet
4-1/2” (11.5 cm)
6” (16 cm)
counter
depth
cabinet depth
(33 cm)
13”
(6” clearance to any
combustible wall)
6”x 6”
(16 x 16 cm)
cut out
Range Hood Outlet
Electrical
service
Gas Outlet
25”
(63.5 cm)
Support desk must be
able to support 220 lbs
55-3/4” (142 cm) min to
61-3/4” (157 cm) max
with std backguard
or
57-3/4” (147 cm) max
low profile backguard
30" (76.2 cm) to
Min
Max 36" (92 cm)
with std backguard
or
Max 32” (81.3 cm)
with low profile backguard
18"
(46 cm)
36" (92 cm)
1/8”
clearance
Vent Hood
0”
clearance
to sides
