Hearthstone Quality Home Heating Products Inc
Tucson Model #8701
23037-1
26
3.
Gently slide the Forked Log (1) onto
the Right post and the Rear post,
with the forked end toward the front
right of the firebox.
4.
Gently slide the “Cordwood” style
log (2) onto the Rear post and the
Left post, with the rear portion of the
log on top of the Forked Log (1).
5.
Gently slide the Straight Log (3)
onto the Right post and the Front
Post, with the Charred end towards
the front.
6.
Gently place the Top Log (4) in the
indentation on the Cordwood Log (2)
and the pilot assembly, being sure to
slide the end into the rear corner of
the firebox.
7.
Spread the Charcoal Embers evenly
across the Pan Burner,
one layer
high
. You may, or may not, need to
use all of the Charcoal Embers.
Keep the remainder to use in the
future. Do not block the air opening
under cast brick panel in any way.
Locate and open the bag of rock
wool. Pull apart small pieces and
sprinkle over the Charcoal Embers.
This material will glow once the unit
is running.
8.
With a 1/8” Allen wrench, use the
bolt to fasten the door to the firebox.
Make sure the door and knob are
properly secured to the firebox
before turning the unit on. Be careful
not to chip the enamel when
fastening the door.
