Phoenix Model 8612
Hearthstone Quality Home Heating Products, Inc
®
www.hearthstonestoves.com
17
I
NSTALLATION
I
N
A
M
OBILE
H
OME
Follow these special requirements for installing your
stove in a mobile home.
Install the stove in accordance with 24 CFR, Part
3280 (HUD)
Permanently attach the stove to your mobile
home’s floor. Use the 1/4" holes or notches in
each leg base to bolt down the stove.
Install one of the following Dura-Vent Mobile
Home Chimney & Connector Kits:
6DP-MH 6” Diameter S/N 9096N
7DP-MH 7” Diameter S/N 9196N
8DP-MH 8” Diameter S/N 9296N
Each kit includes:
Stainless spark arrester cap, storm collar,
Adjustable vented flashing – 0/12 – 6/12,
two 24” Dura/Plus* chimney pipes, 24”
support box with built-in starter section and
trim.
* (UL or ULC approved equipment is acceptable)
You must remove the exterior chimney sections
when transporting Mobile Home.
WARNING: DO NOT INSTALL IN A ROOM USED
FOR SLEEPING.
CAUTION: MAINTAIN THE STRUCTURAL
INTEGRITY OF THE MOBILE HOME WALLS,
FLOOR, CEILING, AND ROOF WHILE YOUR STOVE
IS INSTALLED, AND IN USE.
WARNING: DISCONNECT CHIMNEY BEFORE
TRANSPORTING MOBILE HOME!
Typical Mobile Home Installation.
Chimney is supported by Ceiling.
Stovepipe
Chimney Cap
Chimney Section
Flashing
Adjustable Roof
Storm Collar
Starter section
with built-in
Support Box
