2
4
Vent-Free Gas Log Heater User Manual
Operation (cont.)
INSPECTING BURNERS
Check the pilot flame pattern and burner flame patterns often.
PILOT FLAME PATTERN
Figure
22
shows a correct pilot flame pattern. Figure 2
3
shows an incorrect pilot flame pattern. The
incorrect pilot flame is not touching the thermocouple. This will cause the thermocouple to cool. When the
thermocouple cools, the heater will shut down. If pilot flame pattern is incorrect, as shown in Figure 2
3
:
• Turn the heater off (see TO TURN OFF GAS TO THE HEATER, page 2
2
).
• See the TROUBLESHOOTING GUIDE,
page
26
.
Fig. 22—Correct Pilot Flame Pattern
Fig. 23—Incorrect Pilot Flame Pattern
Do not allow fans to blow directly into the heater. Avoid any drafts that alter
Do not use a blower insert, heat exchanger insert, or other accessory not
approved for use with this heater.
WARNING
WARNING
burner flame patterns.
Remote Control Operation
Refer to the remote control manufacturers instructions for safe, proper assembly and operation.
