06-03
35020 Rev G
19
BCBR36 B-VENT GAS APPLIANCE
L. MAINTENANCE INSTRUCTIONS
Note:
The look of the flames and embers may differ
based on the type of fuel and venting assembly that
is required.
Figure 21 - Intermittent Pilot Ignition Assembly
Figure 23 - Air Shutter
Figure 22 - Flame Patterns
1. Cleaning the Burner and Control Compartment
Keep the burner and control compartment clean by
brushing and vacuuming at least once a year. Always
turn off the wall switch (or remote control) and gas valve
before cleaning.
2. Checking the Vent System
Inspect the flame of the burner periodically, making
sure the flames are steady, not lifting or floating. The
flame color should be blue with yellow tips. The sensor
tip should be covered with flame. See Figure 21.
If the vent configuration is installed incorrectly, the vent
may cause the flames inside the appliance to lift or
ghost, a dangerous situation. Inspect the flames after
installation to ensure proper performance. See
Figure 22. If the vent configuration is correct, yet the
flames are lifting or ghosting, shut off gas to the
appliance and contact a qualified service technician.
Air Shutter Adjustment
To reduce the possibility of soot, we have equipped
your appliance with an adjustable air shutter. See
Figure 23. Your air shutter is provided in the closed
position for natural gas and 1/8 open for propane.
3. Proper Operation of Optional Glass Doors
While operating your appliance, you should either have
the doors completely open or completely closed, but
never partially open. See Figure 24.
Figure 24 - Correct Operation of Doors
