06-03
35020 Rev G
13
BCBR36 B-VENT GAS APPLIANCE
6. JK9 Junction Box Installation
Your appliance is supplied with a JK9 Junction Box. To operate the appliance with the supplied 3V AC transformer
and/or remote control option, it is recommended that the junction box be installed and wired at this time to avoid
reconstruction.
a.
Refer to installation instructions included with the JK9 Junction Box.
b.
Wire the junction box per the diagram in Figure 11.
c.
Prior to attaching the junction box to the appliance, the heat shield supplied with your appliance must be installed.
Insert the top flange of the heat shield through the electrical knockout hole from the inside (Figure 12), then insert
the JK9 through the hole and attach with three screws. See Figure 13.
Figure 12 - Attaching the Heat Shield
Figure 13 - Attaching the Junction Box
