Hearth & Home Technologies • SMART-WALL-B Air Duct Kit • 4086-348 Rev. D • 3/20
8
Figure 10. IFT-RC400 Wiring Diagram with SMART-WALL-B
• SMART-WALL-B must be paired to IFT-ACM before
installation is complete.
• If you have 120 VAC Power & Gas to appliance:
- Immediately after connecting the SMART-WALL-B
module connector to the IFT-ACM, the IFT control must be
paired to recognize the SMART-WALL-B as part of the
control configuration.
- Appliance and SMART-WALL-B function must be
verified before installation is complete.
- Consult installation manuals for details.
• If you DO NOT have 120 VAC Power & Gas:
- DO NOT connect SMART-WALL-B module to IFT-
ACM.
- Disconnect 6V power to lock-out appliance.
Failure to follow instructions could result in damage to the TV.
WARNING!
BRN
FLAME
SENSE IGNITER
TO JUNCTION
BOX 110-120
VAC
LED
CONTROL
RF MODULE
ADAPTER
I
S
6 PIN
RED
BLK
ORANGE
(PILOT)
GREEN
(MAIN)
GRN/WHT/BLK
RED/
BLK
RED/
BLK
(OPTIONAL)
IFT-RC400
REMOTE
CONTROL
BLK
RED
2326-136
POWER
HARNESS
SMART-WALL
CONTROL MODULE
SMART-WALL
CONTROL
MODULE
WHT
WHT
WHT
Connect white wire from
SMART-WALL Control Module
to IFT-ECM wire harness
(brown wire).
3-PIN FEMALE CONNECTOR
Connect 3-Pin Female Connector
from SMART-WALL
TM
Control
Module to IFT-ACM (AUX port).
BLK
WHT
GRN
See control module detail in Figure 11.
ACCESSORY CABLE
SMART-WALL
JUNCTION BOX
GROUND SCREW HOLE
CONNECT END OF
GREEN WIRE TO
GROUND SCREW HOLE
