9/15/2011 Hearth & Home Technologies ©
Page17
Problem Scenarios #1 continued...
IntelliFire Plus Troubleshooting
Problem: Pilot wont’ light, no noise and no spark *
7. LP/NG switch on module damaged or not fully engaged into LP or NG setting.
8. Faulty Module
*
Troubleshooting assumes the wireless controls & battery backup have been eliminated from the system.
To do this the remote must be ―unlearned‖ from the system.
8
If the NG/LP selector
switch is not turned com-
pletely to NG or LP set-
ting, the fireplace will not
ignite and will go into
lockout mode.
If the selector switch
spins freely and does not
engage into NG or LP
position the switch is
damaged and the mod-
ule go into lockout mod-
ule. Damaged switch
requires module replace-
ment.
7
