Hearth & Home Heatilator Eco Choice PS50-C Installation Manual Download Page 1

1

June 18, 2019

7059-800B

PELLET BURNING APPLIANCE

MODEL(S):

PS50-C

Installation and service of this appliance should be performed by 

qualified personnel. Hearth & Home Technologies recommends 

HHT Factory Trained or NFI certified professionals.

Installation Manual

Installation & Appliance Set-Up

INSTALLER: 

Leave this manual with party responsible for use and operation.

OWNER:

 Retain this manual for future reference.

NOTICE: DO NOT DISCARD THIS MANUAL

If the information in these instructions is 

not followed exactly, a fire could result 

causing property damage, personal injury, 

or death.

 

WARNING

• 

Do not store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or any 

other appliance.

• 

Do not over fire

 - If appliance or chimney connector 

glows, you are over firing. Over firing will void 

your warranty.

•  Comply with all minimum clearances to combustibles 

as specified. Failure to comply may cause house fire.

HOT SURFACES!

Glass and other surfaces are hot during 

operation AND cool down.

WARNING

Hot glass will cause burns.

•  Do not touch glass until it is cooled

•  NEVER allow children to touch glass

•  Keep children away

• 

CAREFULLY SUPERVISE children in same room 

as fireplace.

•  Alert children and adults to hazards of 

high temperatures

•  High temperatures may ignite clothing or other 

flammable materials.

•  Keep clothing, furniture, draperies and other 

flammable materials away.

CAUTION

Check building codes prior to installation.

• 

Installation MUST comply with local, regional, state 

and national codes and regulations.

• 

Consult local building, fire officials or authorities 

having jurisdiction about restrictions, installation 

inspection, and permits.

CAUTION

Tested and approved for wood pellets, Burning of any 

other type of fuel voids your warranty.

NOTE:

 To obtain a French translation of this 

manual, please contact your dealer or visit 

www.heatilatorecochoice.com

REMARQUE :

 Pour obtenir une traduction française 

de ce manuel, s’il vous plaît 

contacter votre revendeur ou visitez 

www.heatilatorecochoice.com

Summary of Contents for Heatilator Eco Choice PS50-C

























Reviews: