background image

DV3732SBI

Specifications

DVLINEAR36_0520

Lakeville, MN

 

Phone: 888-427-3973   

DVLINEAR36

Shows center of vent framing hole 

for top or rear venting. The center 

of the hole is 1" (25mm) above the 

center of the horizontal vent pipe.

Product information provided is not 
complete and is subject to change 
without notice. Product installation 
must adhere strictly to instructions 
accompanying product to avoid risk of 
fire and potential injury.

APPLIANCE LOCATION

WALL PENETRATION

MANTEL LEG/WALL PROJECTIONS

FRAMING DIMENSIONS

47-1/2"  

34-1/2"

[1207]

[876]

10"

10"

DO NOT PACK WITH 

INSULATION OR 

OTHER MATERIAL

6" 

MIN.

APPLIANCE OPENING

UNLIMITED

7" 

MIN.

WALL MAX.

3'

 

 

 

16" MAX

APPLIANCE OPENING

Combustible/Noncombustible

Without Passive Heat

Combustible/Noncombustible

With Passive Heat

PRODUCT LISTING CODES

US

ANSI Z21.88-2017

CAN

CSA 2.33-2017

UL307B

47-1/2"

[1207]

TOP VENT

ONE 90

0

 ELBOW

SEE INSTALL MANUAL

FOR ALCOVE 

INSTALLATION

TOP VENT

ONE 90° ELBOW

18" [457 mm] required 

when Passive Heat Side 

Discharge Kit is installed.

1/2 IN.

47-1/2"

[1207]

42" [1067]

66" 

[1676]

15-3/4"

[400]

17-1/4" [438]

 •  8/17  

DRAFT COPY

8-5/8"

32-3/4"

17-3/4"

42"

[219]

[832]

[451]

[1067]

NOTE: Header MUST be 

installed on end as 

shown in the diagram.

HEADER: Two 2 X 4s or Two 2 X 6s 

installed on end

AREA

TO COMBUSTIBLES

CLEARANCE TO  

CEILING

31" [787]

NON-COMBUSTIBLE 

FLOOR

0" [0]

COMBUSTIBLE  

FLOORING

0" [0]

BEHIND  

APPLIANCE

1/2" [13]

SIDES OF  

APPLIANCE

1/2" [13]

FRONT OF  

APPLIANCE

36" [914]

31"

0"

0"

 1/2"

 1/2"

36"

[787]

[13]

[13]

[914]

MEASURE FROM TOP 

OF APPLIANCE OPENING 

            TO CEILING

MINIMUM FIREPLACE CLEARANCES /
CLEARANCES TO COMBUSTIBLES

Combustible Mantels

9

10

11

12

TO CEILING

9

12

16

3

MEASUREMENTS FROM

TOP EDGE OF THE OPENING

TO CEILING

16"

3/8 "NON-COMBUSTIBLE 

FINISHING RETURN

DO NOT COVER

NON-COMBUSTIBLE FINISHING RETURN

CEILING

 

 

12" MAX.

1/2" 

THICK WALL

 

SHEATHING

14" MIN. BOTTOM 

OF MANTEL TO TOP OF  

APPLIANCE OPENING

NON-COMBUSTIBLE 

MANTEL

6" 

MAX.

MEASUREMENTS FROM

TOP EDGE OF THE OPENING

TO CEILING

16"

3/8 "NON-COMBUSTIBLE 

FINISHING RETURN

DO NOT COVER

NON-COMBUSTIBLE FINISHING RETURN

CEILING

 

 

COMBUSTIBLE MANTEL CLEARANCES 

(or other materials above appliance)

NON-COMBUSTIBLE MANTEL CLEARANCES 

(or other materials above appliance)

Without Passive Heat

With Passive Heat

Without Passive Heat

With Passive Heat

Reviews: