Hearth & Home Technologies • CK-30 Cabinet Kit Installation Manual • 4126-900 Rev A • 07/22
24
5. Assemble cabinet upper left side to cabinet lower top
using 2 screws. See Figure 6.5.
Figure 6.5
6. Assemble cabinet upper right side to cabinet lower top
using 2 screws. See Figure 6.6.
Figure 6.6
7. Assemble cabinet upper back to cabinet upper sides
using 6 screws. See Figure 6.7.
Figure 6.7
Cabinet Lower
Top
Cabinet Upper
Left Side
Note: Screw
holes in side
will be facing to
the back of the
cabinet.
Cabinet Upper
Left Side
Cabinet Upper
Right Side
Cabinet Upper
Back
8. Install the jumper wire on the reset switch wire on the
side of the insert. Leave the reset switch wire attached
to the side of the insert. See Figure 6.8.
Figure 6.8
9. Install the splitter (SRV2187-198) on the black wire
coming off the 6 pin wire harness on the IFT control.
Connect the splitter to the black wire going to the battery
pack USB port. See Figure 6.9.
Figure 6.9
