4
The remote receiver has a 3-position slide switch: OFF/
REMOTE/ON (see Figure 6).
Figure 6. Remote Receiver
TRANSMITTER
Important: Before operating remote control, transmit-
ter and receiver must have matching security codes.
See section ‘Matching Security Codes’.
Important:
Review ‘Thermo-Updating/Communication-
Safety Features’ under ‘Transmitter Safety Features’
section. Communication Safety features shut down the
fi replace system when a potentially unsafe condition
exists.
Important:
Review ‘Auto Shutdown’ section. This safety
feature shuts down the fi replace after 9 hours of continu-
ous operation, in ON mode only.
Important:
New or fully charged batteries are essential
for proper operation of the multi-function transmitter. The
transmitter operates on 2 AAA-size 1.5V batteries. Use
Alkaline batteries for longer battery life and maximum
operational performance.
Insert 2 AAA-size 1.5V batteries into the battery compart-
ment on the back of the transmitter. When the batteries
are correctly inserted, the screen will display numbers
(see Figure 7 for LCD Display Screen).
NOTE:
If the transmitter is activated from a very cold
condition it may be necessary to allow the transmitter to
stabilize to room temperature (could take up to 15 min-
utes) before accurate room temperatures are displayed
on the screen.
NOTE:
LCD screen is equipped with a “backlite” for
easier viewing of LCD screen. Backlite illuminates when
a function button is depressed. After 5 seconds elapses,
LCD screen will return to its normal state.
NOTE: The remote receiver will only respond to the
transmitter when the 3-position slide button on the
remote receiver is in the Remote position. If the
system does not respond to the transmitter on initial
use, see section Matching Security Codes.
1. With the slide switch in the ON position, the system
is on.
2. With the slide switch in the REMOTE position, the
system only operates if the remote receiver receives
commands from the transmitter.
3. With the slide switch in the OFF position, the system
is off.
NOTE:
The slide switch should be placed in the OFF po-
sition if you will be away from your home for an extended
period of time. Placing the switch in the OFF position also
functions as a safety “lock out” by turning the system off
and rendering the remote receiver inoperative.
REMOTE
RECEIVER
Line cord
from fan
LEARN
110/120 VAC, 3A
(Receptacle on back)
