ECO CHOICE PELLET STOVE SERVICE MANUAL
E. SLOW OR SMOKEY START UP
1) CLEAN FIREPOT
2) FEED ADJUSTMENT PLATE MAY BE SET TOO HIGH
3) CHECK EXHAUST BLOWER AND HEAT EXCHANGER
TROUBLE SHOOTING & REPAIR
G. FEED SYSTEM FAILS TO START
1) CHECK FRONT DOOR AND MAKE SURE IT IS CLOSED
2) CHECK TO SEE IF CALL LIGHT IS ON
3) CHECK THERMOSTAT, #2 SNAP DISC, AND HOPPER SWITCH
4) CHECK FEED MOTOR AND VACUUM SWITCH
5) CHECK EXHAUST SYSTEM FOR OBSTRUCTIONS
H. THERMOSTAT WILL NOT START UNIT
1) CHECK THERMOSTAT WIRES FOR CONTINUITY
2) CHECK THE HOPPER SWITCH
3) CHECK THE RESET BUTTON
4) CHECK FOR POWER TO THE STOVE
5) CHECK CONTROL BOX
F. STOVE RUNS FOR 18 MINUTES -- THEN STOPS FEEDING FUEL
1) CHECK THERMOCOUPLE
*GREEN LIGHT (2.7 mVDC)
*RED LIGHT (12.0 mVDC)
2) ADJUST FEED ADJUSTMENT PLATE FOR LARGER FIRE
3) CHECK THERMOCOUPLE COVER
*COVER NEEDS TO TOUCH THE END OF THE T-COUPLE WIRE
*COVER SHOULD EXTEND 1” INTO FIREPOT
4) CHECK CONTROL BOX
PAGE 4
Shock hazard.
• Do NOT remove grounding prong from plug.
• Plug directly into properly grounded 3 prong
receptacle.
• Unplug cord before doing any checks or repairs.
• Do NOT touch wires while unit is plugged in.
CAUTION