manualshive.com logo in svg

Hearth and Home Technologies BE-36-C, Owner'S Manual

The Hearth and Home Technologies BE-36-C is a high-quality fireplace unit that adds warmth and ambiance to any home. For a complete understanding of its features and proper usage, make sure to download the free Owner's Manual from our website. Explore all the details and instructions provided at manualshive.com.

Share
Download
background image

Hearth & Home Technologies   •  BE-36-C, BE-36-CIPI  •  397-981 Rev. V  1/07

2

Congratulations

Listing Label Information/Location

Model Name: ___________________________________________ Date purchased/installed: __________________

Serial Number: __________________________________________ Location on appliance: ____________________

Dealership purchased from:  _______________________________ Dealer Phone:  __________________________

Notes: _______________________________________________________________________________________

_____________________________________________________________________________________________

Congratulations on selecting a Hearth & Home Technologies 
gas appliance —an elegant and clean alternative to wood 
burning appliances. The Hearth & Home Technologies gas 
appliance you have selected is designed to provide the 
utmost in safety, reliability, and ef

fi

 ciency.

As the owner of a new appliance, you’ll want to read and 
carefully follow all of the instructions contained in this 

Owner’s Manual

. Pay special attention to all Cautions and 

Warnings.

This 

Owner’s Manual 

should be retained for future 

reference. We suggest that you keep it with your other 
important documents and product manuals.

The information contained in this 

Owner’s Manual

, unless 

noted otherwise, applies to all models and gas control 
systems.

Your new Hearth & Home Technologies gas appliance will 
give you years of durable use and trouble-free enjoyment. 
Welcome to the Hearth & Home Technologies family of 
appliance products!

Read this manual before installing or operating this appliance. 

Please retain this owner’s manual for future reference.

We recommend that you record the following 

pertinent information about your appliance.

Gas and Electric 
Information

Model Number

Serial Number

Type of Gas

The model information regarding your speci

fi

 c appliance can be found on 

the rating plate usually located in the control area of the appliance.

Homeowner Reference Information

Heat & Glo, a 

 of Hearth & Home Technologies, Inc.

20802 Kensington Boulevard, Lakeville, MN 55044

brand

 

Heat & Glo, a 

 of Hearth & Home Technologies, Inc.

20802 Kensington Boulevard, Lakeville, MN 55044

brand

 

Not 

Not for 

for use 

use with 

with solid 

solid fuel.

fuel.

((

Ne 

Ne doit 

doit pas 

pas entre 

entre utilise 

utilise avec 

avec un 

un combustible 

combustible solide).

solide).

This 

This appliance 

appliance must 

must be 

be installed 

installed in 

in accordance 

accordance with 

with local 

local codes, 

codes, if 

if any; 

any; if 

if not, 

not, follow 

follow ANSI 

ANSI Z223.1

Z223.1

in 

in the 

the USA 

USA or 

or CAN/CGA 

CAN/CGA B149 

B149 installation 

installation codes. 

codes. 

(Installer 

(Installer l’appareil 

l’appareil selon 

selon les 

les codes 

codes ou 

ou reglements

reglements

locaux 

locaux  ou, 

ou,  en 

en  l’absence 

l’absence  de 

de  tels 

tels  reglements, 

reglements,  selon 

selon  les 

les  codes 

codes  d’installation 

d’installation  CAN/CGA-B149.)

CAN/CGA-B149.)

Type 

Type  of 

of Gas 

Gas 

(Sorte 

(Sorte  De 

De Gaz)

Gaz)

:

NATURAL

TURAL GAS

GAS

MADE 

MADE  IN 

IN  USA

USA

Minimum 

Minimum Permissible 

Permissible Gas 

Gas Supply 

Supply for 

for Purposes 

Purposes of 

of Input 

Input Adjustment.

Adjustment.

Approved 

Approved Minimum 

Minimum 

(De 

(De Gaz) 

Gaz) 

Acceptable

Acceptable

0.0

0.0 in 

in w.c.

w.c.

(Po. 

(Po. Col. 

Col. d’eau)

d’eau)

Maximum 

Maximum Pressure 

Pressure 

(Pression)

(Pression)

 0.0

0.0 in 

in w.c.

w.c.

(Po. 

(Po. Col. 

Col. d’eau)

d’eau)

Maximum 

Maximum Manifold 

Manifold Pressure 

Pressure 

(Pression)

(Pression)

   

   0.0

0.0 in 

in w.c.

w.c.

(Po. 

(Po. Col. 

Col. d’eau)

d’eau)

Minimum 

Minimum Manifold 

Manifold Pressure 

Pressure 

(Pression)

(Pression)

   

   0.0

0.0 in 

in w.c.

w.c.

(Po. 

(Po. Col. 

Col. d’eau)

d’eau)

Model:

Model:

(Modele):

(Modele):

Serial

Serial

(Serie):

(Serie):

ANSI 

ANSI Z21XX-XXXX 

Z21XX-XXXX · 

· CSA 

CSA 2.XX-MXX 

2.XX-MXX  · 

· UL307B

UL307B

XXXXXXXX

XXXXXXXX

IN 

IN CANADA

CANADA

ALTITUDE:

ALTITUDE:

0-0000 

0-0000 FT.

FT.

0000-0000FT.

0000-0000FT.

MAX. 

MAX. INPUT 

INPUT BTUH:

BTUH:

00,000

00,000

00,000

00,000

MIN. 

MIN. INPUT 

INPUT BTUH:

BTUH:

00,000

00,000

00,000

00,000

ORIFICE 

ORIFICE SIZE:

SIZE:

#XXXXX

#XXXXX

#XXXXX

#XXXXX

XXXXXXXX

XXXXXXXX

Total 

Total Electrical 

Electrical Requirements: 

Requirements: 000Vac, 

000Vac, 00Hz., 

00Hz., less 

less than 

than 00 

00 Amperes

Amperes

This product may be covered by one or more of the following patents: (Nos produits sont couverts par un ou plusieurs des brevets suivants): (United States)   
4593510, 4686807, 4766876, 4793322, 4811534, 5000162, 5016609, 5076254, 5113843, 5191877, 5218953, 5263471, 5328356, 5341794, 5347983, 5429495, 
5452708, 5542407, 5601073, 5613487, 5647340, 5688568, 5762062, 5775408, 5890485, 5931661, 5941237, 5947112, 5996575, 6006743, 6019099, 6048195, 
6053165, 6145502, 6170481, 6237588, 6296474, 6374822, 6413079, 6439226, 6484712, 6543698, 6550687, 6601579, 6672860, 6688302B2, 6715724B2, 
6729551, 6736133, 6748940, 6748942, D320652, D445174, D462436; (Canada)1297749, 2195264, 2225408; or other U.S. and foreign patents pending (ou 
autres brevets americains et etrangers en attente).

Hearth & Home Technologies, Inc.
20802 Kensington Blvd., Lakeville, MN 55044

Summary of Contents for BE-36-C


































































Reviews:

No comments

Related manuals for BE-36-C

Napoleon Oakville Series Owner'S Manual preview
Oakville Series
Brand: Napoleon Pages: 72
Napoleon NEFI24H Manual preview
NEFI24H
Brand: Napoleon Pages: 4
Valor 495 Owner'S Manual preview
495
Brand: Valor Pages: 12
Napoleon GSS42CFN Installation And Operating Instructions Manual preview
GSS42CFN
Brand: Napoleon Pages: 48
Napoleon GDS60-1 Instructions preview
GDS60-1
Brand: Napoleon Pages: 4
Napoleon GVF42N Installation And Operation Instructions Manual preview
GVF42N
Brand: Napoleon Pages: 20
Napoleon Allure Vertical Series Installation And Operation Manual preview
Allure Vertical Series
Brand: Napoleon Pages: 120
ZANTIA CRONOS Use And Maintenance Manual preview
CRONOS
Brand: ZANTIA Pages: 88
Regal Flame CANF-20 Quick Start Manual preview
CANF-20
Brand: Regal Flame Pages: 10
Empire Comfort Systems VFP32FB0F-5 Installation Instructions And Owner'S Manual preview
VFP32FB0F-5
Brand: Empire Comfort Systems Pages: 13
PATIO HQ NC4314R-42-Base Manual preview
NC4314R-42-Base
Brand: PATIO HQ Pages: 16
Paramount Fitness BLT-999A-7 Instructions For Use Manual preview
BLT-999A-7
Brand: Paramount Fitness Pages: 14
Looft Industries Looftlighter X Owner'S Manual preview
Looftlighter X
Brand: Looft Industries Pages: 16
Napoleon CBI3600-N Installation And Operating Instructions Manual preview
CBI3600-N
Brand: Napoleon Pages: 56
Napoleon GDS25N Installation And Operation Instructions Manual preview
GDS25N
Brand: Napoleon Pages: 28
RAIS attika 600 MAX-1 Installation Manual preview
attika 600 MAX-1
Brand: RAIS Pages: 26
Valor G4 780MN Installation Manual preview
G4 780MN
Brand: Valor Pages: 12
Klarstein Zermatt 10033051 Manual preview
Zermatt 10033051
Brand: Klarstein Pages: 44

Brands by name

Popular brands

Load more brands