WSG Bridge User Guide
HBUS
For future expansion.
CLOCK SOURCE SWITCH
The clock selector switch gives the user a simple way to select
any one of the three clock sources – A, B, or External.
STATUS INDICATING LOGO
The illuminated logo serves as an indicator for several purposes.
Under normal conditions, the logo will be blue, indicating valid
clock is present (could be internal or external). A red logo
indicates no valid clock is present. If the logo is blinking red, this
typically indicates a temperature problem, but could indicate
something else. Refer to troubleshooting section for detailed
information.
DUAL POWER PORTS
The WSG Bridge supports two external power supplies. The
second power supply provides redundancy in case of power
failure. On the front of the WSG Bridge, an LED directly above
the power switch will be lit if two power supplies are present.
This provides an easy way to know if one of the power supplies
has failed. On the back of the WSG Bridge, an LED is present
directly under each power port, and will be lit if power is present
at that port.
I/O CARDS
The modular WSG Bridge consists of four card slots, which can be
populated with any configuration of input and/or output cards to fit
your needs.
WAVES SOUNDGRID CARD
Allows WSG Bridge to communicate
with any pro audio equipment that uses
Waves SoundGrid.
• Connects 64 channels of
simultaneous audio input and output with other SoundGrid
enabled equipment using a standard Ethernet network connection
• Supports sampling rates of 44.1kHz, 48kHz, 88.2kHz, and 96kHz
DANTE CARD
Allows WSG Bridge to communicate
with any audio equipment using Dante
protocol.
• Connects 64 channels of
simultaneous audio input and output with other Dante-enabled
equipment using a standard Ethernet network connection
• Supports sampling rates of 44.1kHz, 48kHz, 88.2kHz, and 96kHz
Quick Start User Guides
for interface cards are available at
www.hearback.com/support
MADI and External Clock Cards coming soon!
FRONT PANEL
REAR PANEL
LED Status Indicator
Sample Rate LED Indicators
Clock Source Switch
Power Switch
“Dual” Power LED Indicator
Main 48V Power Input
Secondary 48V Power Input
HBus Input (future expansion)
HBus Output (future expansion)
USB Connection
Card Slot 1 (Dante Card shown)
Card Slot 2 (
shown unpopulated
)
Card Slot 3 (
Waves SoundGrid Card shown
)
Card Slot 4 (
shown unpopulated
)
DETAIL DIAGRAM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
150W
150W
2
Summary of Contents for WSG Bridge
Page 1: ...64 CHANNEL MODULAR AUDIO CONVERTER...
Page 3: ...WSG Bridge User Guide iii...
Page 23: ...WSG Bridge User Guide 17 NOTES...
Page 24: ...2018 Hear Technologies 02 2018...
