CHARGING:
A. Power adapter
B. Battery dock
C. LED
D. Battery
E. Pin
CAUTION: only use the original power adapter (A) to
recharge the unit.
If the charger, battery compartment (dock) or battery are
damaged or lost, please call our customer service to order
the parts.
Charging must be done when the product loses power and
efficiency during grating operations.
To recharge the unit, remove the battery pack (D) from the bottom of the grater and place it in the
battery dock (B) of the charging base (A).
Connect the power adapter (A) to the electrical outlet.
The LED charging indicator (C) lights up when:
The battery is connected to charging base. To see if battery is properly connected.
The power plug is connected to power supply.
At the end of charging, the LED will not go off, ensure the charging time is monitored.
The maximum charging time is about 4-5 hours.
When charging is finished, remove the battery pack from its charging dock and insert it again into
the battery compartment located on the bottom of the grater.
The following measures will preserve battery life:
When you first use the unit, fully charge the battery by leaving it connected to the adapter for about
4 hours. Before you recharge, ensure the battery is fully exhausted.
For at least 2 times a year, fully discharge the battery and then recharge it for 4 hours.
When you are going not to use the unit for a long time (i.e., 2 months), it is recommended to charge
the battery for about 4 hours before using it again.
If the battery life seems to lower after several use, it is recommended to operate the grater until the
battery is completely exhausted. At this point, charge it for 4 hours.
If the problem persists, the battery could be no longer capable of supplying power to the unit. In this
case, please contact our customer service to order a new battery.
