8
2. Identify the Right Upright (92) which is marked
with a “Right” sticker.
Have a second person hold the Right Upright
(92) near the Right Base Cover (102).
See the
inset drawing.
Tie the wire tie in the lower end
of the Right Upright securely around the end of
the Upright Wire (93). Then, pull the other end
of the wire tie up through the top of the Right
Upright until the Upright Wire is routed com-
pletely through the Right Upright.
Gently pull up on the Upright Wire (93) as you
set the Right Upright (92) on the Base (103) in-
side the Right Base Cover (102).
Be careful not
to pinch the Upright Wire.
Attach the Right Upright (92) to the Base (103)
with two 3/8" x 3 3/4" Patch Bolts (5) and two
3/8" Star Washers (6). Note: It may be neces-
sary to tip the top of the Right Upright forward
slightly as you thread the Bolts into it.
Do not
tighten the Bolts yet.
103
93
102
2
92
6
5
93
92
Wire
Tie
3. Have a second person hold the Left Upright (91)
near the Left Base Cover (100).
See the inset
drawing.
Tie the wire tie in the Left Upright se-
curely around the end of the TV Cable (95) and
the AV Cable (94). Then, pull the other end of
the wire tie up through the top of the Left Upright
until the TV Cable and the AV Cable are routed
completely through the Left Upright.
Gently pull up on the TV Cable (95) and the AV
Cable (94) as you set the Left Upright (91) on
the Base (103) inside the Left Base Cover (100).
Be careful not to pinch the Cables.
Attach the Left Upright (91) to the Base (103)
with two 3/8" x 3 3/4" Bolts (5) and two 3/8" Star
Washers (6). Note: It may be necessary to tip
the top of the Left Upright forward slightly as you
thread the Bolts into it.
Do not tighten the
Bolts yet.
With the help of a second person, lower the
treadmill off the cardboard stand. Save the card-
board stand for step 10.
103
100
3
91
95
94
6
5
94, 95
91
Wire
Tie
Wire
Tie
Wire
Tie
