Page
8
of
24
4/24/2018
supplied from Healthmark Industries. The user must follow the protocol
for cleaning and disinfecting or sterilizing described in the Instructions for
Cleaning and Disinfecting or Sterilizing section.
Inspection
Prior to use, inspect the Flexible Inspection Scope for signs of wear or damage.
Operation can be verified by following the steps in the Verifying Operation section
of this manual.
WARNING: Carefully inspect the external surfaces of the Flexible
Inspection Scope and any accessories to assure they are smooth and free of
any protrusions or sharp edges.
Routine Maintenance
There are no user serviceable parts within the Flexible Inspection Scope. No user
maintenance beyond cleaning is required. Refer all service or replacement needs to
Healthmark Industries. The contact information is listed at the end of this document.
Flexible Inspection Scope Viewer Software
IMPORTANT:
Before connecting the Flexible Inspection Scope, install the scope
Viewer Software from the USB Flash drive on a computer.
System Requirements: MS Windows versions 7, 8, or 10.
Connecting Flexible Inspection Scope
1.
Connect the Camera Cable to the Flexible Inspection Scope.
2.
Plug in the USB Connector to the USB port in your computer.
Flexible Inspection Scope Viewer Software
