OVERVIEW
Thank you for choosing the Tub-Rail from HealthCraft. Please read and
understand the instructions in this manual; keep manual for future
reference. It is your responsibility to see that your Tub-Rail is properly
assembled, installed, and cared for. Failure to follow instructions in this
manual could result in serious injury or death. If you are not equipped to
undertake the outlined work, we would recommend that you have your
Tub-Rail installed by a qualified contractor.
The Tub-Rail is a high quality tub mounted grab bar that clamps onto a
bathtub threshold. The Tub-Rail is intended for moderate vertical load
bearing to provide sitting and standing support for people with reduced
mobility. The clamping mechanism is a stainless steel threaded rod that,
when tightened, pulls an articulating clamp plate against the bathtub
threshold to provide force strong enough to support the user. The
maximum user weight for this product is 300lbs / 136kgs. Not to be used
on fiberglass bathtubs. Note: Product is not intended to support full body
weight. The Tub-Rail is not to be used in any other way than described
above.
ONE YEAR WARRANTY
Products are covered by a one year warranty against defects in materials
and workmanship for the original purchaser. Warranty excludes products
that have been damaged through misuse, accidental damage, alteration,
normal wear and tear, wood material and stain, or the use of corrosive or
abrasive cleaning products.
Buyer hereby indemnifies, agrees to hold harmless and defend HealthCraft
Products Inc. from and against any and all liabilities, claims, (founded and
unfounded), losses, damages, costs and expenses (including without
limitation consequential damages and reasonable professional fees)
resulting from buyers specification, application, or improper use of goods
described hereon; buyers omission or neglect. HealthCraft Products Inc.
does not assume any liability for damage resulting from services performed
by others or faulty installation, misuse or misapplication of goods sold by
HealthCraft Products Inc. HealthCraft Products Inc. shall not be liable for
prospective profits or special, indirect, or consequential damages, or for the
cost of any corrective work done without HealthCraft Products Inc. prior
approval. HealthCraft Products Inc. total liability hereunder shall in no
event exceed the purchase price of the goods specified hereon.
Specifications subject to change without notice.
HealthCraft Products Inc.
2790 Fenton Road
Ottawa, Canada
K1T 3T7
English
DELIVERY CONTENTS / PARTS
FIGURE A.
1. Handle
2. Clamp Arm & Plate Assembly
3. Knob
4. Plastic Washer
SAFETY CONSIDERATIONS
FIGURE B.
1. The Tub-Rail is intended for moderate vertical load bearing ONLY.
2. The Tub-Rail is not intended for sideward (lateral) support.
3. The Tub-Rail is not intended to support the full weight of an individual.
4. The Tub-Rail is not intended for children to play or hand onto.
5. CAUTION – clamp force can cause damage and creates possible pinch point.
6. CAUTION - Tub-Rail and bathtub are slippery when wet.
ASSEMBLY
FIGURE
C.
1. To ensure secure installation, clean contact surfaces on bathtub
thoroughly and wipe dry.
2. Place Tub-Rail on side of bathtub (knob facing outwards), ensuring the
handle contacts the top and outside of the bathtub.
3. Turn knob until clamp plate is tight against inside of bathtub.
4. Test and inspect hardware regularly, and tighten if required.
TECHNICAL DATA
See Figure D.
PRODUCT USAGE
See Figure E.
EC
REP
Gate 88
Kanalgatan 45B
Skellefteå, Sweden
93123
6
Summary of Contents for Tub-Rail TBR-S
