Trouble Shooting Guide for the PhysioMax
Malfunction
Cause
Solution
The Display does not turn on
when pedaling lightly.
1. Display wire is disconnected
or connected improperly.
2. Low Batteries in the Display
3. Damaged Display Control
Wire
4. Damaged Generator, Display
PCB or Control PCB
1. Detach and Re-connect
Display wires to make sure
they are connected
properly.
2. Replace the Batteries in
the Display
3. Replace any damaged
Wires, Control Panels or
Generators
Display Works well but no
resistance.
1. Brake Control Wire is
improperly connected or
damaged.
2. The Display PCB or Low
Control PCB may also be
damaged.
1. Detach and Re-connect
brake control wires to
make sure they are
connected properly
2. Replace Damaged Power
Board if needed.
Meter does not display the
RPM Value.
1. Damaged Generator or Lower
Control PCB
1. The component will need to
be repaired or replaced by a
qualified technician.
Heavy resistance when you
begin pedaling
1. Remove the Display Control
Wires, If there is now less
resistance it may be caused by
a wrong the VR Default Value.
2. Remove the Display Control
Wires, if the resistance is still
when pedaling it may be a
damaged Lower Control PCB
1and 2. In both cases, this
component will need to be
repaired or replaced by a
qualified technician.
Warranty Information:
Serial #:_________________ Purchase Date:_______________
3 Year Parts Warranty, One Year Labor, Lifetime Frame
HealthCare International, Inc. - Customer & Technical Service
1.360.321.7090
– 1.800.398.9121
- www.HCIFitness.com
Summary of Contents for PhysioMax TBT-1000
Page 4: ...EXPLODED DRAWING...
