Health O Meter 2400KL User Instructions Download Page 21 | Manualshive

Page: 21 / 24

background image

21

MAINTENANCE

Maintenance

The following pages provide instructions for maintenance, cleaning, calibrating, and
troubleshooting for the 2400KL scale. Maintenance operations other than those described in this
manual should be performed by qualified service personnel.

Caution: Before first use, or after long periods of non-use, check the scale for proper
operation and function. If the scale does not operate correctly, refer to qualified service
personnel.

1. Check overall appearance of the total scale for any obvious damage, wear, and tear.

2. Inspect the AC adapter for cord cracking or fraying, or for broken/bent prongs.

Cleaning

Proper care and cleaning is essential to ensure a long life of accurate and effective operation.

Caution: Disconnect the scale from the AC adapter power source prior to cleaning the
unit.

1. Clean all external surfaces with a clean damp cloth or tissue. Mild antimicrobial or
antibacterial soap and water solution may be used. Dry with a clean soft cloth.

2. Do not immerse the scale into cleaning or other liquid solutions.

3. Do not use Isopropyl Alcohol or other solutions to clean the display surface.

4. Do not use abrasive cleaners.

«
...
19
20
21
22
23
...
»

Summary of Contents for 2400KL

























Reviews:

No comments

Related manuals for 2400KL

imageRUNNER ADVANCE C9075S PRO

Brand: Canon Pages: 20

Brand: Garmin Pages: 12

Brand: S-COM Pages: 400

Brand: Unipulse Pages: 99

Brand: Accutrol Pages: 25

Brand: Mainpine Pages: 16

Brand: Danfoss Pages: 20

SmartSwitch 6000

Brand: Cabletron Systems Pages: 76

Brand: Lawler Pages: 5

Brand: Laird Pages: 38

Brand: Laird Pages: 5

Brand: Savant Pages: 2

Brand: Samson Pages: 102

Brand: tell Pages: 11

Brand: Mitsubishi Pages: 30

Brand: Case IH Pages: 81

ibaMS16-DI-220V Series

Brand: IBA Pages: 32

Brand: Ezodo Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands