Page 24
Step 33: Attach the Main Upright Cap to the Main Frame using:
2 - M10 x 25 Button Head Bolts
2 - M10 Large OD Flat Washers
1 - M8 x 12 Button head Bolts
Note : Tighten Bolts, but do not over tighten. 1 - M8 Flat washer
Align the four tabs on the bottom of the Rubber Cups with the four notches in the bottom of the
pockets in the Main Upright Cap and insert the Rubber Cups into the pockets.
Insert the Rubber Tablet Holder into the Pocket in the Main Upright Cap. The Rubber Tablet
Holder only fits one way. Make sure the outer edge of the Rubber Tablet Holder sits flat against
the Main Upright Cap.
Step 33
1 - M8 x 12 Button Head Bolt
1 - M8 Flat Washer
2 - M10 x 25 Button Head Bolts
2 - M10 Large OD Flat Washers
Align the four tabs on the
bottom of the rubber cup
with the notches in the
bottom of the pocket.
Rubber tablet holder only fits one
way. Make sure the outer edge
of the tablet holder sits flat
against the Cap surface.
Main Upright
Cap
Rubber Cup
Rubber Tablet
Holder
Summary of Contents for INSPIRE
Page 6: ...Page 3 ...
Page 7: ...Page 4 ASSEMBLY INSTRUCTIONS ...
Page 28: ...Page 25 DECAL REFERENCE 877 738 1729 8 870 718 ...
Page 29: ...Page 26 DECAL REFERENCE ...
